Technical data

Procedures for Managing nPartitions
Setting and Checking Cell Attributes
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
240
• If a cell’s use-on-next-boot setting is changed from “no” (do not use) to
“yes” (use), you must perform a reboot for reconfig of the cell’s
partition by using the shutdown -R command.
• Otherwise, if the cell use-on-next-boot settings are only changed from
“yes” to “no” then you can perform a standard reboot using the
shutdown -r command.
HP Restricted / DRAFT
DRAFT NOV 2001