Technical data

Procedures for Managing nPartitions
Setting and Checking Cell Attributes
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
237
“Yes” is equivalent to a BCH cell configuration value of ON and “no” is
equivalent to OFF.
• A failure usage setting of “activate” (equivalent to “ri”) indicates that
the cell is set to reactivate with interleave in the event of any failure
during the cell’s self test.
Use the parstatus -C command to list the use-on-next-boot setting for
all cells, which is shown in the “Use On Next Boot” column.
To list a specific cell’s failure-usage and use-on-next boot settings, issue
the parstatus -V -c# command and specify the cell number.
Step 3. To modify a cell’s use-on-next-boot and failure usage attribute settings,
use the parmodify -p # -m # ... command and specify the cell’s new
settings.
# parstatus -C
[Cell]
CPU Memory Use
OK/ (GB) Core On
Hardware Actual Deconf/ OK/ Cell Next Par
Location Usage Max Deconf Connected To Capable Boot Num
========== ============ ======= ========= =================== ======= ==== ===
cab0,cell0 active core 4/0/4 2.0/ 0.0 cab0,bay0,chassis1 yes yes 0
cab0,cell1 absent - - - - - -
cab0,cell2 active base 4/0/4 2.0/ 0.0 cab0,bay1,chassis3 yes yes 0
cab0,cell3 absent - - - - - -
cab0,cell4 active core 4/0/4 2.0/ 0.0 cab0,bay0,chassis3 yes yes 1
cab0,cell5 absent - - - - - -
cab0,cell6 active base 4/0/4 2.0/ 0.0 cab0,bay1,chassis1 no yes 1
cab0,cell7 absent - - - - - -
#
# parstatus -V -c2
[Cell]
Hardware Location : cab0,cell2
Global Cell Number : 2
Actual Usage : active base
Normal Usage : base
Connected To : cab0,bay1,chassis3
Core Cell Capable : yes
Firmware Revision : 6.0
Failure Usage : activate
Use On Next Boot : yes
Partition Number : 0
Memory OK : 2.00 GB
Memory Deconf : 0.00 GB
#
HP Restricted / DRAFT
DRAFT NOV 2001