Technical data

Procedures for Managing nPartitions
Listing Cell nPartition Assignments
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
202
Listing Cell nPartition Assignments
Each cell in an nPartition server complex either is assigned to an
nPartition, or it is unassigned (if it is on the “free cell list”, making it an
available resource).
You can list all cells and their nPartition assignments by using these
methods:
• Service Processor (GSP or MP) on page 202
This procedure (Command menu, CP and DU commands) lists all cell
partition assignments and other details from the server complex’s
service processor.
• HP-UX on page 203
This procedure (parstatus -C) lists all cells in a server complex and
their partition assignments.
• Partition Manager on page 203
This procedure (selecting each partition and Available Resources on
the left side of the primary window) lets you view all cell partition
assignments in a server complex from Partition Manager.
Service Processor
(GSP or MP)
This procedure (Command menu, CP and DU commands) lists all cell
partition assignments and other details from the server complex’s service
processor.
Step 1. Log in to the service processor for the complex and enter CM to access the
Command menu.
Step 2. Enter the CP command to list all configured nPartitions in the server
complex.
Step 3. Enter the DU command to list additional details (such as available
core I/O) for the cells assigned to the various nPartitions in the server
complex.
On HP Superdome servers, you also can use the service processor
Command menu’s IO command to list cell-to-I/O chassis connections.
HP Restricted / DRAFT
DRAFT NOV 2001