Technical data

Procedures for Managing nPartitions
Listing All Configured nPartitions
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
198
Listing All Configured nPartitions
You can configure each server complex to have multiple nPartitions,
which are composed of cells in the complex.
You can list all configured nPartitions in the server complex by using the
following methods:
• Service Processor (GSP or MP) on page 198
This procedure (Command menu, CP command) lists all partitions in
a server complex from the complex’s service processor.
• HP-UX Commands on page 199
This procedure (parstatus -P command, and parstatus -C for details)
lists information about all partitions in a server complex from HP-UX.
• Partition Manager on page 201
This procedure (viewing the left side of Partition Manager primary
window) lists all nPartitions in a server complex using Partition
Manager.
Service Processor
(GSP or MP)
This procedure (Command menu, CP command) lists all partitions in a
server complex from the complex’s service processor.
Step 1. Log in to the service processor for the complex and enter CM to access the
Command menu.
# telnet sdome-s
Trying...
Connected to sdome-s.rsn.hp.com.
Escape character is ’^]’.
Local flow control off
GSP login: Accountname
GSP password:
CO: Consoles
VFP: Virtual Front Panel
CM: Command Menu
CL: Console Logs
SL: Show chassis Logs
HE: Help
X: Exit Connection
GSP> CM
Enter HE to get a list of available commands
GSP:CM>
HP Restricted / DRAFT
DRAFT NOV 2001