Technical data

Procedures for Booting and Resetting nPartitions
Configuring Boot Paths and Boot Actions
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
184
-b Autoboot setting for the local partition:
-b on to automatically boot the PRI path.
-b off to not boot PRI.
-s Autosearch setting for the local partition:
-s on to attempt to perform the HAA path’s boot
action when PRI is not booted (either when -b is off,
or when PRI fails to boot when -b is on).
-s off to never attempt to perform the HAA action.
For example, to always stop the local partition at BCH when booting
issue the setboot -b off -s off command.
See Setting Autoboot through Boot Paths and Boot Actions on page 180 or
the setboot (1M) manpage for details.
HP Restricted / DRAFT
DRAFT NOV 2001