Technical data

Procedures for Booting and Resetting nPartitions
Listing nPartition Boot Settings
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
176
HP-UX This procedure (parstatus -V -p # and setboot commands) lists an
nPartition’s boot settings using HP-UX commands.
NOTE Use the parstatus command to list various partition boot settings for
any nPartition in a server complex.
The setboot command only provides information about the local
partition’s PRI and ALT boot paths and PRI boot actions.
Step 1. Log in to HP-UX running on an nPartition.
If you want to list autoboot settings for an nPartition, you must log in to
the partition. To list other details, such as boot paths and core cell
settings, you can log in to any nPartition.
Step 2. Issue the parstatus -V -p # command to list detailed information
about the specified nPartition (-p # ), including boot-related details.
The boot setting information that parstatus -V -p # reports is
equivalent to the following BCH commands: PATH, CELLCONFIG, and
CORECELL.
HP Restricted / DRAFT
DRAFT NOV 2001