Technical data

Procedures for Booting and Resetting nPartitions
Booting HP-UX in Single-User or LVM-Maintenance Mode
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
158
Step 3. From the ISL prompt, issue the appropriate Secondary System Loader
(hpux) command to boot the HP-UX kernel in the desired mode.
Use the hpux loader to specify the boot mode options and to specify which
kernel (such as: /stand/vmunix) to boot on the nPartition.
• To boot HP-UX in single-user mode:
hpux boot -is /stand/vmunix
• To boot HP-UX in LVM-maintenance mode:
hpux boot -lm /stand/vmunix
• To boot HP-UX at the default run level:
hpux boot /stand/vmunix.
To exit the ISL prompt and return to the BCH interface, issue the EXIT
command instead of specifying one of the above hpux loader commands.
See the hpux (1M) manpage for a detailed list of hpux loader options.
ISL Revision A.00.42 JUN 19, 1999
ISL> hpux -is /stand/vmunix
Boot
: disk(0/0/2/0/0.13.0.0.0.0.0;0)/stand/vmunix
8241152 + 1736704 + 1402336 start 0x21a0e8
INIT: Overriding default level with level ’s’
INIT: SINGLE USER MODE
INIT: Running /sbin/sh
#
HP Restricted / DRAFT
DRAFT NOV 2001