Technical data

Procedures for Booting and Resetting nPartitions
Booting HP-UX on an nPartition
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
154
To boot the /stand/vmunix HP-UX kernel from the device without
stopping at the ISL prompt, enter n to automatically proceed past ISL. In
most situations you will boot /stand/vmunix and not need to stop at ISL.
To boot an HP-UX kernel other than /stand/vmunix, or to boot HP-UX in
single-user or LVM-maintenance mode, stop at the ISL prompt and
specify the appropriate arguments to the hpux loader.
Main Menu: Enter command or menu > BOOT PRI
Primary Boot Path: 0/0/1/0/0.15
Do you wish to stop at the ISL prompt prior to booting? (y/n) >> n
ISL booting hpux
Boot
: disk(0/0/1/0/0.15.0.0.0.0.0;0)/stand/vmunix
HP Restricted / DRAFT
DRAFT NOV 2001