Technical data

Procedures for Booting and Resetting nPartitions
Finding Bootable Devices
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
151
The SEARCH command reports all potential boot devices it locates.
The SEARCH command lists up to the first 20 potential boot devices that it
locates, and lists each with a path number (P0 through P19).
To boot a device that was reported by the SEARCH command, specify the
path number or the full device path. For example, BOOT P0 would boot
the path listed as path number P0.
---- Main Menu ---------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|HAA|ALT|<path>] Boot from specified path
PAth [PRI|HAA|ALT] [<path>] Display or modify a path
SEArch [ALL|<path>] Search for boot devices
ScRoll [ON|OFF] Display or change scrolling capability
COnfiguration menu Displays or sets boot values
INformation menu Displays hardware information
SERvice menu Displays service commands
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
REBOOT Restart Partition
RECONFIGRESET Reset to allow Reconfig Complex Profile
----
Main Menu: Enter command or menu > SEARCH
Searching for potential boot device(s)
This may take several minutes.
To discontinue search, press any key (termination may not be immediate).
Path# Device Path (dec) Device Type
----- ----------------- -----------
P0 0/0/1/0/0.15 Random access media
P1 0/0/1/0/0.12 Random access media
P2 0/0/1/0/0.11 Random access media
P3 0/0/1/0/0.9 Random access media
P4 0/0/1/0/0.8 Random access media
P5 0/0/1/0/0.6 Random access media
Main Menu: Enter command or menu >
HP Restricted / DRAFT
DRAFT NOV 2001