Technical data

Procedures for Booting and Resetting nPartitions
Accessing a Partition Console and BCH Interface
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
147
In most situations you can telnet to the service processor.
Step 2. Select the Console menu (CO) from the service processor’s Main menu.
The Console menu is the method for accessing nPartition consoles.
If you are accessing the service processor using a single-partition-user
account, selecting the CO (console) option takes you directly to the
partition’s console.
If using an operator or administrator account, you can access the console
for any of the partitions within the server complex.
Step 3. At the Console menu, enter the partition number for the partition whose
console (and BCH interface) you wish to access.
Skip this step if you are accessing the service processor using a
single-partition-user account.
# telnet sdome-s
Trying...
Connected to sdome-s.rsn.hp.com.
Escape character is ’^]’.
Local flow control off
GSP login: Accountname
GSP password:
Welcome to
Superdome’s Guardian Service Processor
GSP MAIN MENU:
Utility Subsystem FW Revision Level: SR_XXXX_D
CO: Consoles
VFP: Virtual Front Panel
CM: Command Menu
CL: Console Logs
SL: Show chassis Logs
HE: Help
X: Exit Connection
GSP> CO
HP Restricted / DRAFT
DRAFT NOV 2001