Technical data

Boot and Reset Overview for nPartitions
Monitoring Partition Boot Activity
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
138
Skip this step if you are accessing the service processor using a
single-partition-user account.
Step 3. View the VFP details for information about the partition and its current
boot state.
To exit the VFP and return to the service processor main menu, type ^b
(Control-b).
The VFP provides information about the partition state, partition
activity, each cell’s state, and each cell’s activity. The VFP display
updates as the cell or partition state and activities change.
Partition VFP’s available:
# Name
--- ----
0) jules00
1) jules01
S) System (all chassis codes)
Q) Quit
GSP:VFP> 1
E indicates error since last boot
Partition 1 state Activity
------------------ --------
Cell(s) Booting: 57 Logs
# Cell state Activity
- ---------- --------
4 Booting Cell firmware test 28 Logs
6 Booting Cell firmware test 28 Logs
GSP:VFP (^B to Quit) >
HP Restricted / DRAFT
DRAFT NOV 2001