Technical data

Boot and Reset Overview for nPartitions
Overview of nPartition Boot Features
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
128
• Before powering off a cell, the cell should be inactive; unassigned; or
assigned to a partition that either has been shut down and halted or
has been reset to a ready for reconfig state.
Powering on or powering off an I/O chassis resets the cell to which it is
connected (if any). Follow the same guidelines for power cycling I/O
chassis that you follow for power cycling cells.
HP Restricted / DRAFT
DRAFT NOV 2001