Technical data

Using Console and Service Processor Interfaces
Using Chassis Code Log Viewers
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
116
On nPartition servers, chassis codes are recorded in the server complex
activity log (for events of alert level 0 or alert level 1) or the error log
(for events alert level 2 or higher).
When you enter the chassis log viewer by entering SL at the service
processor (GSP or MP) Main menu you can select from these viewers:
• Activity Log Viewer
Allows you to browse recorded chassis codes of alert level 0 or 1.
• Error Log Viewer
Allows you to browse recorded chassis codes of alert level 2 or higher.
• Live Chassis Logs Viewer
Displays chassis codes in real time as they are emitted.
By default, the live chassis code viewer has the Alert filter enabled,
which causes it to display only the events of alert level 3 or higher.
To view all chassis codes in real-time, type U for the Unfiltered option.
You also can filter the live codes by cell (C) or nPartition (P).
Cell filter: only display chassis codes emitted by a specific cell in the
server complex. Partition filter: only display chassis codes emitted by
hardware assigned to a specific nPartition.
When viewing chassis code logs, type V to change the display format. The
viewers can show chassis codes in text format (T), keyword format (K), or
raw hex format (R).
GSP> SL
Chassis Logs available:
(A)ctivity Log
(E)rror Log
(L)ive Chassis Logs
(C)lear All Chassis Logs
(Q)uit
GSP:VW> L
Entering Live Log display
A)lert filter
C)ell filter
P)artition filter
U)nfiltered
V)iew format selection
^B to Quit
Current filter: ALERTS only
HP Restricted / DRAFT
DRAFT NOV 2001