Technical data

Using Console and Service Processor Interfaces
Configuring Service Processor Network Settings
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
106
The following examples show service processor LAN status for various
HP nPartition servers.
Default Service Processor Network Settings
Table 3-5 and Table 3-6 list the default customer LAN and private LAN
network settings for nPartition servers. Only Superdome servers have a
private LAN.
GSP:CM> LS
Current configuration of GSP customer LAN interface
MAC address : 00:10:83:27:04:5a
IP address : 15.99.49.129 0x0f633181
Name : feshd5-u
Subnet mask : 255.255.248.0 0xfffff800
Gateway : 15.99.49.254 0x0f6331fe
Status : UP and RUNNING
Current configuration of GSP private LAN interface
MAC address : 00:a0:f0:00:83:b1
IP address : 192.168.2.15 0xc0a8020f
Name : priv-05
Subnet mask : 255.255.255.0 0xffffff00
Gateway : 192.168.2.100 0xc0a80264
Status : UP and RUNNING
GSP:CM>
MP:CM> LS
Current configuration of MP customer LAN interface
MAC address : 00:30:6e:05:19:ac
IP address : 15.99.84.140 (0x0f63548c)
Hostname : redxii-c
Subnet mask : 255.255.255.0 (0xffffff00)
Gateway : 15.99.84.254 (0x0f6354fe)
Status : UP and RUNNING
AutoNegotiate : Enabled
Data Rate : 100 Mb/s
Duplex : Half
Error Count : 0
Last Error : none
MP:CM>
HP Superdome Service Processor LAN Status
HP rp7410 or rp8400 Service Processor LAN Status
Table 3-5 Default Configuration for Service Processor
Customer LAN (All nPartition Servers)
Customer LAN IP Address 192.168.1.1
Customer LAN Host Name gsp0
Customer LAN Subnet Mask 255.255.255.0
Customer LAN Gateway 192.168.1.1
HP Restricted / DRAFT
DRAFT NOV 2001