Technical data

Using Console and Service Processor Interfaces
Service Processor Commands: Quick Reference
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
102
Status Commands
The status commands provide command help and system status
information, such as hardware status and nPartition configurations.
RS Reset an nPartition.
SYSREV Display all cabinet FPGA and firmware revisions.
(HP rp8400 and HP rp7410 servers only.)
TC Send a TOC signal to an nPartition.
TE Broadcast a message to all users of the Command
menu.
VM Margin the voltage in a cabinet. (HP Superdome
servers only.)
WHO Display a list of users connected to the service
processor.
Table 3-3 Service Processor: Status Commands
Command Description
CP Display nPartition cell assignments.
HE Display the list of available commands.
IO Display I/O chassis connections to cells.
(HP Superdome servers only.)
LS Display LAN connected console status.
MS Display the status of the modem.
PS Display detailed power and hardware configuration
status.
Table 3-2 Service Processor: Service Commands
Command Description
HP Restricted / DRAFT
DRAFT NOV 2001