Technical data

Using Console and Service Processor Interfaces
Service Processor Commands: Quick Reference
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
101
Service Processor Commands:
Quick Reference
The following tables list commands available from the service processor
Command menu:
• Service Commands on page 101
• Status Commands on page 102
• System and Access Configuration Commands on page 103
NOTE For a complete and current list of all service processor commands, enter
the HE command at the service processor Command menu.
Service Commands
The service commands available provide boot, reset, power, TOC, status,
and other commands for common service activities.
Table 3-2 Service Processor: Service Commands
Command Description
BO Boot an nPartition past an inactive boot-is-blocked
(BIB) state to make it active.
DF Display FRU information of an entity.
MA Return to the Main menu.
MFG Enter the manufacturing mode. (Administrator only.)
MR Modem reset.
PE Power entities on or off. (Administrator and operator
only.)
RE Reset entity. (Administrator and operator only.)
RR Reset an nPartition to a ready for reconfiguration state,
which makes the nPar inactive.
HP Restricted / DRAFT
DRAFT NOV 2001