Installation guide

Chapter 2
Unpacking the Server
Wheel Kit Installation
31
Step 16. Insert the slot on the caster cover into the front caster. Secure the cover to the server by tightening
the captive screw on the cover at the rear of the server.
Figure 2-17 Securing Each Caster Cover to the Server
Step 17. Install the front bezel.
Locate and mount the 4 plastic spring clips on front corners of chassis.
Orient the bezel onto the front of the server.
Push the bezel onto the spring clips on either side of the chassis until it snaps in place.
Rear Casters
Front Casters
Right Caster Cover
Left Caster Cover