Installation guide

Chapter 2
Unpacking the Server
Wheel Kit Installation
29
Step 7. Remove the cushions from the lower front and rear of the server. Do not disturb the side cushions.
Figure 2-15Foam Block Removal
Step 8. Locate and identify the caster assemblies. Use the following table to identify the casters.
NOTE The caster part number is stamped on the caster mounting plate.
Table 2-2 Caster Part Numbers
Caster Part Number
Right front A6753-04001
Right rear A6753-04005
Left front A6753-04006
Left rear A6753-04007