Installation guide

Chapter 2

Unpacking the Server

Wheel Kit Installation

Compare the packing list with the contents of the wheel kit before beginning the installation.

Tools Required for Installation

The following list provides the installer with the recommended tools to perform the wheel kit installation.

• Diagonal side cutters

• Safety glasses

• Torx screwdriver with T-15, T-25 bits

• Phillips head screwdriver

WARNING Wear protective glasses while cutting the plastic bands around the shipping

container. These bands are under tension. When cut, they can spring back and cause

serious eye injury.

Table 2-1 Wheel Kit Packing List

Part Number Description Quantity

A6753-04013 Wheel Kit consisting of the

following components:

A6753-04002 Right side caster cover 1

A6753-04003 Left side caster cover 1

A6753-04004 Top cover 1

A6753-00007 Caster cover 2

A6753-04001 Right front caster assembly 1

A6753-04005 Right rear caster assembly 1

A6753-04006 Left front caster assembly 1

A6753-04007 Left rear caster assembly 1

0515-2478 M4 x 0.7 8mm T15 steel zinc

machine screw (used to attach

each caster to the chassis)

A6093-44013 Plywood unloading ramp 1

Not Applicable Phillips head wood screw (used to

attach the ramp to the pallet)