Installation guide

Chapter 2
Unpacking the Server
Using the RonI Model 17000 SP 400 Lifting Device
23
Step 1. Obtain the HP J1530B Rack Integration Kit Installation Guide before proceeding with the
rack-mount procedure. This guide covers these important steps:
• Installing the anti-tip stabilizer kit (A5540A)
• Installing the ballast kit (J1479A)
• Installing the barrel nuts on the front and rear columns
• Installing the slides
Step 2. Follow the instructions on the outside of the server packaging to remove the banding and cardboard
top from the server pallet.
Figure 2-9 Server with Shipping Box Removed
Step 3. Remove all cartons from the pallet, leaving only the server.