Installation guide

Chapter 2

Unpacking the Server

Stand Alone and To Be Racked Systems

The following instructions explain how to configure stand-alone or to be racked systems.

Rack Mount System Installation

There are several documents written to help with rack mounting the server. This list is intended to guide the

HP Installation Specialist to the documentation that has been written by the Rack Solutions team. The

external website is

http://h18004.www1.hp.com/products/servers/proliantstorage/bcs-rackandpower/index.html.

Rack System/E

Detailed rack information for the rack system/E covers the following topics:

• Safety and Regulatory Information

• Description of the Standard Racks and Physical Specifications

• Installation Guidelines

• Procedures

Rack System/E Stabilizer Feet

The stabilizer installation guide for the rack system/E covers the following topics:

• How to Install the Stabilizers

• Moving the Rack

HP J1530B Rack Integration Kit

The rack integration kit information covers installing the following products:

• Ballast Kit (J1479A)

• Anti-Tip Stabilizer Kit (A5540A)

• Slide Rails

• Cable Management Arm (CMA)

• Interlock Device Assembly

This installation guide provides a complete parts list of the hardware and tools required to perform the

installation of the products mentioned. Installation of the products is illustrated in this guide. The part

number for this installation guide is J1530-90001.