Installation guide

Chapter 2

Unpacking the Server

Receiving the Server Cabinet

This section contains information about unpacking the cabinet.

WARNING Wear protective glasses while cutting the plastic bands around the shipping

container. These bands are under tension. When cut, they can spring back and cause

serious eye injury.

NOTE Position the pallet to allow for enough space to roll the cabinet off the pallet before unpacking.

Remove the cabinet using the following procedure:

Step 1. Cut the polystrap bands around the shipping container.

Step 2. Lift the cardboard top cap from the shipping box. See Figure 2-1.

Figure 2-1 Removing the Polystraps and Cardboard

Step 3. Remove the cardboard wrap from the pallet.