System information

Chapter 1
Overview and Common Procedures—Server Upgrade
Dual Processor Module
46
Step 13. Route the turbo fan power cables through the heatsink posts so that the cables will not be pinched
when the processor airflow guide is set in place.
Figure 1-38 Routing Turbofan Power Cables through Heatsink Posts
Step 14. Connect the turbo fan power cables.
Step 15. Connect the power pod cable to the power connector on the system board.
Figure 1-39 Connecting the Power Pod Cable
Step 16. Replace the processor airflow guide. (See “Removing the Processor Airflow Guide” on page 27.)
Step 17. Replace the memory airflow guide. (See “Replacing the Memory Airflow Guide” on page 27.)