System information

Chapter 1
Overview and Common Procedures—Server Upgrade
Removing and Replacing the System Covers
22
Step 1. Align the front edge of the top cover with the alignment mark on the optical drive bay (Figure 1-9).
Figure 1-9 Aligning the Top Cover
Step 2. Grasp the blue release lever and slide the top cover toward the front of the system until the lever
snaps into place (Figure 1-10).
Figure 1-10 Closing the Top Cover
Step 3. Slide the system into the rack enclosure and reconnect the power and external cables.
To replace cover,
align front edge here
then slide forward