Specifications

Chapter 4

Troubleshooting

LAN LEDs

The front panel LAN LED indicates the system is communicating over the Gigabit or system management

LAN:

• Blinking green—The system is communicating over the LAN

• Solid green—LAN link is established, no current LAN activity

• Not green—No LAN cable attached, LAN network dead or the system is off

10/100/1000 LAN LEDs are on the rear panel:

One System Management 10/100 LAN port on the rear panel provides the following LEDs:

Four management processor LAN LEDs are also on the rear panel:

Table 4-4 10/100/1000 Base-T Ethernet LAN Connector LEDs

LED Description

1000BT Blinking green—the 1000 MHz with ethernet protocol and twisted-pair wiring is

enabled, off—no link

100BT Blinking green—the 100 MHz with ethernet protocol and twisted-pair wiring is

enabled, off—no link

10BT Blinking green—the 10 MHz with ethernet protocol and twisted-pair wiring is

enabled, off—no link

Activity Blinking green—LAN activity

Table 4-5 iLO Manageability Card LAN LEDs

LAN LED Location Color State

Self-test Top Yellow Management processor running selftest

or error

Off Management processor has booted

10BT 2nd from top Green 10BT link established

Blinking

green

10BT activity

Off No link or 100BT link

100BT 2nd from bottom Green 100BT link established

Blinking

green

100BT activity

Off No link or 10BT link

Standby

power

Bottom Green Standby power on

Off Standby power off