Specifications

Chapter 1
Controls, Ports, and Indicators
Rear Panel
16
Rear Panel
The HP 9000 rp3410 and HP 9000 rp3440 server rear panels include communication ports, I/O ports, AC
power connector, and the locator LED/button. Additional LEDs located on the rear panel of the HP 9000
rp3410 and HP 9000 rp3440 servers signal the operational status of:
• 10/100/1000 Base-T Ethernet LAN
• iLO manageability card LAN
Figure 1-5 Rear View
Table 1-4 Rear Panel Connectors and Switches
Connector/Switch Function
AC power Primary power connection for the server.
LVD/SE SCSI 68-pin, low-voltage differential, single-ended U160 SCSI. This connector provides
external SCSI connection on SCSI Channel B.
(1 GB) 10/100/1000
LAN
10/100/1000 base-T ethernet LAN connector.
Serial A (console)
and Serial B
9-pin male serial connectors—factory use only.
USB Four universal serial bus (USB 2.0) connectors.
TOC Transfer of control button. Halts all system processing and I/O activity and
restarts system.
AC Power Receptacle
LVD/SE SCSI
10/100
Management LAN
10/100/1000 LAN
VGA Port-disabled
DO NOT USE
USB Ports
System Lock
Console/Serial Port A (factory use only)
Locator Button and LED
TOC Button
Serial Port B
(factory use only)
Console/Remote/UPS
PCI Slot 1
PCI Slot 2
PCI Slot 3
(rp3440
only)
PCI Slot 4
(rp3440
only)