Specifications

Chapter 1

Controls, Ports, and Indicators

Additional Controls and Indicators

The HP 9000 rp3410 and HP 9000 rp3440 servers can have up to three low-voltage differential (LVD),

3.5-inch form factor hot-pluggable disk drives installed. These disk drives have LEDs that provide status and

activity information.

Hot-Plug Disk Drive Indicators

The hot-plug disk drives have two LEDs per drive, as described below.

• Status LED—The drive status LED is red when power is applied to drive circuits.

• Activity LED—The Drive Activity LED is flashing green and indicates disk drive activity. This LED is

directly controlled by the disk drive and turns on when a drive is accessed.

Figure 1-3 Hot-Plug Disk Drive LED Indicators

Table 1-2 Hot-Plug Disk Drive LED Definitions

LED State Description

Status LED Red Drive fault

Activity LED Flashing green Reading/scanning hard drive

Status LED

Activity LED