User Guide

Product features and components
Features
The monitor includes the following features:
● 70.9 cm (27.9 in) diagonal viewable screen area with 3840 × 2160 resolution, plus full-screen support
for lower resolutions; includes custom scaling for maximum image size while preserving original aspect
ratio
● Liquid crystal display (LCD) with active matrix
● Nonglare panel with an WLED backlight
● Wide viewing angle to allow viewing from a sitting or standing position, or moving from side to side
● Tilt adjustment capability
● Removable stand for exible monitor head mounting solutions
● HP Quick Release 2 device to quickly attach the monitor head to the stand with a simple click, and then
remove it with the convenient sliding tab release
● DisplayPort™ video input (cable included with select products)
● Two High-Denition Multimedia Interface™ (HDMI) video inputs (cable included with select products)
● Audio-out (headphone) jack
● Four on-screen display (OSD) buttons, three that you can recongure to quickly allow selection of the
most commonly used operations
● Plug and Play capability if supported by your operating system
● VESA® mounting bracket for attaching the monitor head to a wall-mount device or swing arm
● Support for a mounting bracket to attach the monitor to a workstation
● On-screen display (OSD) adjustments in several languages for setup and screen optimization
● Support for FreeSync™, an Adaptive-Sync technology, to reduce stuttering and tearing in games and
videos by locking the monitor’s refresh rate to the frame rate of a compatible graphics card
NOTE: Adaptive refresh rates vary by display.
● Energy saver feature to meet requirements for reduced power consumption
NOTE: For safety and regulatory information, see the Product Notices provided in your documentation kit.
To access the latest user guide, go to http://www.hp.com/support, and follow the instructions to nd your
product. Then select User Guides.
2 Chapter 1 Getting started