User`s manual

Chapter 7: Troubleshooting and support 75
Insufficient space
in memory
(on card)
to complete
request.
Insufficient room
in internal
memory or on
the memory card
to rotate an
image.
Free up space on the card
by deleting some images,
or perform the rotation
using computer software.
Communication
error
Camera received
an error code
from the HP
software on the
computer.
Disconnect the USB cable
(or lift the camera out of
the HP camera dock), then
re-connect and try again.
Charging Flash... The camera is
recharging the
flash.
It takes longer to charge
the flash when the
batteries are low. If you
see this message often,
you may need to replace
or recharge the batteries.
Card full
or
Memory full
Insufficient room
in internal
memory or on
the memory card
to save more
images.
Unload images from the
camera to your computer,
then delete all images
from the memory card or
internal memory. Or put a
new memory card in the
camera.
No images in
memory
or
No images on
card
There are no
images or video
clips in the
camera and you
are trying to
review them.
Take some pictures or
video clips.
Message Possible cause Solution