User`s manual

Chapter 3: Reviewing images and video clips 41
Recording and deleting audio clips
NOTE This option works only with still images, not video clips.
After taking a picture, you can go back later and add an audio
clip to it. If an image already contains an audio clip, you can
record a new clip or delete the current audio clip.
1 In Playback mode, select the image you want, then press OK
to display the Playback menu.
2 Select the Record Audio option.
3 If the image does not already
have an audio clip, recording
starts immediately. Recording
continues until you press OK
again or the memory fills up
(whichever comes first). A
microphone icon ( ) and an
elapsed time counter appear in
the Image Display during recording.
If the current image already has an
audio clip, the Record Audio
menu option will take you to a sub-
menu that allows you to keep the
current audio clip, record a new clip,
or delete the current clip.
NOTE To listen to audio clips, you
must download the images from the camera to your
computer, then use the HP Photo & Imaging software. You
can also display images from the camera to a TV as a
slideshow. See Chapter 5: Unloading, printing, and
displaying images on page 51.