User`s manual

28 hp photosmart 430 series user’s manual
Using self-timer mode
1 Secure the camera to a tripod or set it on a stable surface.
2 Press the Mode button on the top of the camera until
the Self-Timer icon appears on the Image Display.
3 Frame the subject in the viewfinder.
4 The next steps depend on whether you are capturing a still
picture or a video clip.
NOTE The Video/Self-Timer light on the front of the camera
blinks before the camera takes the picture or video clip.
When
capturing:
Procedure
Still
picture
1 Press the Shutter button down. A 10-second
countdown appears on the Image Display.
You cannot record audio when using the Self-Timer,
but you can add an audio clip to the image later (see
Recording and deleting audio clips on page 41).
Video clip
1 To start recording, press the Video button and
then release it. A 10-second countdown appears
on the Image Display.
2 To stop recording the video clip, press the
Video button again.