Datasheet
Table Of Contents
- Product description
- External component identification
- Illustrated parts catalog
- Removal and replacement procedures preliminary requirements
- Removal and replacement procedures for Authorized Service Provider parts
- Component replacement procedures
- Unlocking the device and disabling Always On Remote Management (select HP devices only)
- Bottom cover
- Display assembly components (panel, bezel, webcam, microphone)
- Keyboard
- SSD drive
- WLAN module
- Display assembly
- RTC battery
- Heat sink
- Battery
- Fingerprint reader board
- NFC module
- ForcePad (Touchpad)
- System board
- Power button
- Speaker assembly
- Component replacement procedures
- Computer Setup (BIOS), MultiBoot, and HP PC Hardware Diagnostics (UEFI) in Windows 8.1
- Computer Setup (BIOS), MultiBoot, and HP PC Hardware Diagnostics (UEFI) in Windows 7
- Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI) in Ubuntu Linux
- Specifications
- Backup and recovery in Windows 8.1
- Backup and recovery in Windows 7
- Backing up, restoring, and recovering
- Statement of memory volatility
- Power cord set requirements
- Recycling
- Index
b. Disconnect the cable (2) from the webcam/microphone module, and then remove the webcam
module from the display enclosure (3).
The webcam module is available using spare part number 790068-001.
4. If it is necessary to replace the display panel:
a. Remove the six Phillips PM2.0×1.8 screws that secure the display panel to the display enclosure
(1), and then rotate the top of the display panel downward (2) onto the keyboard.
Display panels are available using the following spare part numbers:
●
790071-001 — 31.75-cm (12.5-in) QHD raw display panel, non-touch
●
790070-001 — 31.75-cm (12.5-in) FHD raw display panel, non-touch
36 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts