User Manual

8/20q Fibre Channel Switch QuickTools switch management user guide 71
Figure 32 SNMP v3 User Editor dialog box
Table 14 describes the SNMP v3 User Editor dialog box parameters. After configuring the user, click OK to
save the settings and close the dialog box.
Testing a switch
The Switch Diagnostics dialog box (Figure 33) allows you to test and verify the operational status of
switches (online and offline). To open the Switch Diagnostic dialog box, open the Switch menu, select
Switch Diagnostics, and then select Online Switch Diagnostics or Offline Switch Diagnostics. For each type
of test, only one switch at a time can be tested. Offline Diagnostics can only be selected for the entry
switch.
The diagnostic tests are:
• Online—A non-disruptive test that exercises port-to-device connections for all ports on a switch that are
currently online except for TR ports, which are not included in Online Switch Diagnostics.
Table 14 SNMP v3 User Editor dialog box fields
Field Description
User Name Name assigned to this SNMP v3 user.
Group Sets user's Read privileges: Read Only permits user to view
only SNMP v3 user settings, Read Write permits user to view
and change SNMP v3 user settings.
Authentication Type None, MD5, SHA. If None, no authentication phrase is
required. MD5 and SHA require an authentication phrase.
Authentication Phrase A unique string or phrase that functions as a password that
verifies the authenticity of the user.
Confirm Authentication
Phrase
Re-enter the Authentication Phrase to confirm it.
Privacy Type DES or None. If None, no privacy phrase is required.
Privacy Phrase A unique string or phrase that functions as a password that
verifies the privacy of the user.
Confirm Privacy Phrase Re-enter the Privacy Phrase to confirm it.