User Manual

HP StorageWorks Simple SAN Connection Manager user guide 41
Figure 20 Perform Other Operations dialog box
15. If you clicked Perform Other Operations on the Welcome... Configure Your SAN dialog box, select
from these common SAN configuration operations:
Logical Disk and Partition Operations:
•Click Assign Logical Disk to Server to open the Logical Disk Server Presentation dialog box (see
Assigning and unassigning a logical disk to a server on page 95).
•Click Create & Manage Partitions to open the Create & Manage Partitions dialog box (see
Creating and managing partitions on page 105).
•Click Expand Logical Disk Size to open the Expand Logical Disk dialog box (see Expanding a
logical disk on page 97).
•Click Delete Logical Disk to open the Delete Logical Disk dialog box (see Deleting a logical disk
on page 98).
Drive Operations:
•Click Manage Hot Spare Drive to set or remove a drive as a hot spare from the Manage Storage
Subsystem dialog box (see Managing storage subsystems on page 116).
•Click Blink Drive LED to flash a drive’s LED from the Manage Storage Subsystem dialog box (see
Managing storage subsystems on page 116).
Switch Operations:
•Click Set Switch IP Address to open the Set Switch IP Address dialog box (see Setting the switch
IP address on page 55).
•Click Update Switch Firmware to open the Switch Firmware Update wizard (see Updating switch
firmware on page 57).
HBA Operations:
•Click Update HBA BIOS to open the Update HBA BIOS wizard (see Updating an HBA BIOS
image on page 76).