Manual

HP StorageWorks Simple SAN Connection Manager user guide 17
After the FC driver is installed, a diagnostic window (Figure 6) shows the HBA properties and targets
found.
Figure 6 Installation wizard: SAN diagnostics
6. Click OK to close the SAN diagnostics window and continue.
When the HP StorageWorks VDS Hardware Providers for EVA (or for MSA) Disk Arrays component is
installed, a message box (Figure 7) reminds you to check for the latest VDS hardware providers on the
HP web site.
Figure 7 VDS HW Provider Info message box
7. Click OK to close the message box and continue.
If the Simple SAN Connection Manager software component is installed on a system with EVA storage,
the Add EVA Management Account dialog box (Figure 8) prompts you to either select an existing user
account or to create a user account to manage your EVA.