Hardware Reference Guide

Removing and installing the rear port cover
Removing the rear port cover
1. Place the computer facedown on a soft at surface. HP recommends that you set down a blanket, towel,
or other soft cloth to protect the bezel and screen surface from scratches or other damage.
2. If the security lock screws are secured, use a T15 tamper-resistant Torx security screwdriver to remove
both screws (1).
3. Slide the rear port cover retainer tabs toward each other (2) to release the port cover.
4. Pull the port cover (3) toward the bottom and o the computer.
Removing and installing the rear port cover 13