Hardware Reference Guide

Replacing the computer access panel
1. Align the edges of the access panel with the computer. Press in the tabs around all sides of the panel
until it is in place.
2. Reinstall the stand.
See Attaching and removing a stand on page 7.
3. Reconnect all cables to the computer.
See Connecting cables on page 11.
4. Reinstall the rear port cover.
See Installing the rear port cover on page 14.
5. Relock any security devices that were disengaged when the access panel was removed.
6. Place the computer in the upright position.
7. Plug the power cord into a AC outlet.
Removing and replacing the computer access panel 29