Hardware Reference Guide

5. Press the Connect button on the receiver for approximately ve seconds. The status light on the receiver
will ash for approximately 30 seconds after the Connect button is pressed.
6. While the status light on the receiver is ashing, press the Connect button on the underside of the
mouse for ve to ten seconds. After the Connect button is released, the status light on the receiver will
stop ashing, indicating that the devices have been synchronized.
NOTE: If the mouse and keyboard still do not work, then remove and replace the batteries. If the mouse and
keyboard are still not synchronized, then synchronize the keyboard and mouse again.
Synchronizing the optional wireless keyboard and mouse 25