Maintenance and Service Guide

15. If it is necessary to replace the wireless antenna:
a. Remove the display bezel.
b. Release the display panel.
c. Release the display back cover.
d. Detach the wireless antenna transceivers (1) from the display back cover. (The wireless antenna
transceivers are attached to the display back cover with double-sided adhesive.)
e. Release the wireless antenna cables from the retention clips (2) and routing channel built into the top,
left and right, and bottom edges of the display back cover.
f. Remove the wireless antenna.
The wireless antenna is available using spare part number L46566-001.
Reverse this procedure to reassemble and install the display assembly.
Component replacement procedures 53