Datasheet

3. Remove the WWAN module (3) by pulling the module away from the slot at an angle.
NOTE: If the WWAN antenna cables are not connected to the terminals on the WWAN module, protective
sleeves should be installed on the antenna connectors, as shown in the following illustration.
Reverse this procedure to install the WWAN module.
WLAN module
Description Spare part number
Intel 802.11 a/b/g/n 2x2 Combo Adapter 670292-001
Intel 802.11 b/g/n HMC 1x1 675794-001
Atheros 802.11 b/g/n 1x1 690019-001
Intel 802.11 2x2 a/b/g/n 695915-001
Intel 802.11 2x2 a/b/g/n 710661-001
Intel 802.11 a/b/g/n 2x2 + Bluetooth 4.0 WLAN 717381-001
Component replacement procedures 75