Datasheet

Power connector cable
Description Spare part number
For use on models equipped with a 15.6–inch display assembly 738694-001
For use on models equipped with a 14–inch display assembly 738683-001
Before removing the power connector cable, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Battery on page 64), and then remove the following components:
a. Service cover (see
Service cover on page 65)
b. Hard drive (see
Hard drive on page 66)
c. Optical drive (see
Optical drive on page 77)
d. Keyboard (see
Keyboard on page 80)
e. Base enclosure (see
Base enclosure on page 91)
f. USB board (see
USB board on page 94)
g. Speakers (see
Speakers on page 105)
h. Fan and heat sink assembly (see
Fan and heat sink assembly on page 87)
Remove the power connector cable:
1. Disconnect the power connector cable (1) from the system board.
2. Release the power connector cable (2) from the clips built into the base enclosure.
Power connector cable 113