Datasheet
Processor
NOTE: The processor spare part kit includes replacement thermal material.
Description Spare part number
Intel Dual Core i7-4600M 2.80-GHz processor (3.0-MB L3 cache, 37 W) 737330-001
Intel Dual Core i5-4330M 2.80-GHz processor (3.0-MB L3 cache, 37 W) 738201-001
Intel Dual Core i5-4300M 2.60-GHz processor (3.0-MB L3 cache, 37 W) 738309-001
Intel Dual Core i5-4200M 2.50-GHz processor (3.0-MB L3 cache, 37 W) 737328-001
Intel Dual Core i3-4100M 2.50-GHz processor (3.0-MB L3 cache, 37 W) 737474-001
Intel Dual Core i3-4000M 2.40-GHz (SC turbo up to 3.30-GHz) processor (1600-MHz FSB, 3.0-MB L3
cache, 37 W)
737327-001
AMD A10-5750M with Radeon HD 8650G Graphics (quad-core; 3.5 GHz/2.5 GHz; 35W, 4 MB L2 cache) 713548-001
AMD A10-4600M with Radeon HD 7660G Graphics (quad-core; 3.2 GHz/2.3 GHz; 35W; 4 MB L2 cache) 683046-001
AMD A8-4500M with Radeon HD 7640G Graphics (quad-core; 2.8 GHz/1.9 GHz; 35W; 4 MB L2 cache) 683048-001
AMD A6-4400M with Radeon HD 7520G Graphics (dual-core; 3.2 GHz/2.7 GHz; 35W; 1 MB L2 cache) 683047-001
A6-5350M with Radeon HD 8450G Graphics (dual-core; 3.5 GHz/2.9 GHz; 35W; 1 MB L2 cache) 713550-001
AMD A4-4300M with Radeon HD 7420G Graphics (dual-core; 3.0 GHz/2.5 GHz; 35W; 1 MB L2 cache) 685990-001
AMD A4-5150M with Radeon HD 8350G Graphics (dual-core; 3.3 GHz/2.7 GHz; 35W; 1 MB L2 cache) 713549-001
AMD A8-5550M 3.1 GHz/2.1 GHz 4M 35W 713551-001
Before removing the processor, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Battery on page 64), and then remove the following components:
a. Service cover (see
Service cover on page 65)
b. Hard drive (see
Hard drive on page 66)
c. Optical drive (see
Optical drive on page 77)
d. Keyboard (see
Keyboard on page 80)
e. Base enclosure (see
Base enclosure on page 91)
f. Fan and heat sink assembly (see
Fan and heat sink assembly on page 87)
Remove the processor:
1. Use a Torx8 screw driver to turn the processor locking screw one-half turn counterclockwise (1), until
you hear a click.
Processor 109