Technical data
Table Of Contents
- Technical Reference Manual for OEMs HP Models 743, 744, and 748
- Contents
- 1 General Information
- Model 743 and Model 744 VME Board Computers
- Product Description
- Supported Configurations
- Model 743 and Model 744 External Devices
- Keyboard and Mouse
- Model 743 and Model 744 Cables
- Model 743 and Model 744 Functional Description
- Model 744 Block Diagram
- CPU Circuit
- Boot ROM Circuit
- Graphics Circuit
- Model 743 Memory Controller Circuit
- Model 744 Memory Controller Circuit
- LED Displays
- I/O Controller ASIC
- VME Controller ASIC
- I/O Expansion
- I/O Expansion Block Diagrams
- Model 748 Ruggedized Workstation
- Model 743 and Model 744 VME Board Computers
- 2 References
- 3 Quality
- 4 Mechanical Information
- 5 Electrical Information
- Video Connector Pinouts
- Audio Connector Pinouts
- HP Parallel Connector Pinouts
- RS-232 Connector Pinouts
- AUI LAN Connector Pinouts
- Single-Ended SCSI Connector Pinouts
- FW SCSI Connector Pinout
- PS/2 Connector Pinouts
- VME Connector Pinouts
- Real-Time Clock (RTC) Battery Information
- Video Output Signal Specifications
- Video Timing Specifications
- 6 Power Requirements
- 7 Product Design Considerations
- Index
5-5
Electrical Information
Figure 5-3 illustrates the connector pin locations on each end of the HP A4223A conversion
video cable.
Figure 5-3 HP A4223A Conversion Video Cable Connectors
Table 5-3 identifies HP A4223A conversion video cable pins.
Table 5-3 A4223A Conversion Video Cable Wiring Table
15-Pin MDSM 15-Pin D-Sub
Pin 1 Pin 12
Pin 2
Pin 3 Pin 1
Pin 4 Pin 6
Pin 5 Pin 2
Pin 6 Pin 7
Pin 7 Pin 3
Pin 8 Pin 8
Pin 9 Pin 10
Pin 10 Pin13
Pin 11 Pin 9
Pin 12
Pin 13
Pin 14
Pin 15 Pin 14