Specifications

Document No. DER05102
Effective Date 25 May 07
Page No. 1 of 2
TOOLS AND EQUIPMENT
DE-1000 CENTRIFUGE
GENERAL
The following tool list includes all tools and equipment supplied to facilitate maintenance of the
DE-1000 Centrifuge. Each component is listed with its part number, quantity supplied, and use or
application.
TABLE 5102-1 DE-1000 CENTRIFUGE TOOL LIST
PART NO. DESCRIPTION / APPLICATION QTY
Allen 33212 Long-Arm Allen Wrenches, 3/32” to 1/2”
Various rotating ass’y hardware
1
Allen 41216 Allen Head Socket, 1/2” x 1/2” Drive
Various rotating ass’y hardware
1
Allen 14MM Allen Wrench, 14 MM
Various rotating ass’y hardware
1
OTC-1039 Bearing Puller, 2-Jaw, 10” Reach, 0” to 12” Spread
Remove main bearing inner race from liquid bowl head shaft
1
HXCBF038-16X250 Hex Head Jack Bolt, 3/8-16 x 2-1/2” Lg
Separate Rotodiff/Gearbox from flange
2
HXCBF031-18X400 Hex Head Jack Bolt, 5/16-18 x 4” Lg
Separate conveyor bearing housing from liquid end bowl head shaft
4
HXCBF038-16X400 Hex Head Jack Bolt, 3/8-16 x 4” Lg
Separate conveyor bearing housing from solid end bowl head shaft
4
10792-00 Vertical Lifting Bracket
Lift conveyor from Liquid Bowl Ass’y
1
10791-00 Vertical Stand
Support Liquid Bowl Ass’y vertically during maintenance
1
WFSS-31 5/16” Flat Washers
Attach vertical lifting bracket to Rotodiff/Gearbox flange
6
NHHS-31-18 Hex Nut, heavy, 5/16-18
Attach vertical lifting bracket to Rotodiff/Gearbox flange
6
SKCS-38-16x175 Socket Hd Cap Screw, 3/8-16 x 1-3/4”
Attach vertical lifting bracket to Rotodiff/Gearbox flange
4