Specifications

HARDWARE TORQUE SPECIFICATIONS Document No. DER05018
Effective Date 15 Oct 07 Page 5 of 6
Liquid End Hardware Installation
No. Description Qty Lubricant Torque Location
1 3/8-16 x 1-1/4 Hx Skt Hd 12 Anti-Seize 252 in-lbs Liq. End Bowl Hd
2* 5/16 x 1 Pin 4 Loctite 680 N/A Liq. End Bowl Hd
3 5/16 x 5/16 x 3 Key 1 N/A N/A Liq. End Bowl Hd
4 3/8-16 x 1-1/2 Hx Skt Hd 8 Anti-Seize 252 in-lbs Liq End Bearing Hsng
5 3/8-16 x 1 Hx Skt Hd 4 Anti-Seize 252 in-lbs Liq. End Seal Hsng
13 1/4-20 x 1 Hx Skt Hd 8 Anti-Sieze 83 in-lbs Pulley Sheave
14 5/16-18 x 4 Hx Hd 6 Anti-Seize Unspecified Flinger Cover
15 3/8-16 x 1 Flt Hx Skt Hd 16 Anti-Seize 183 in-lbs Pillow Block Cover
16 3/8-16 x 1 Hx Skt Hd 8 Anti-Seize 252 in-lbs Spline Hub
17 1/4-20 x 5/8 Hx Skt Hd 4 Anti-Seize 144 in-lbs Pillow Block Flinger
21* 5/16-18 x 1 Hx Skt Hd 9 Loctite 262 300 in-lbs Rotodiff/Gearbox Flange
26 5/16-18 x 7/8 Hx Skt Hd 12 Anti-Seize 144 in-lbs Effluent Port
28 3/8-16 x 1/2 Set Screw 2 Anti-Seize N/A Seal Housing
29 5/8-11 x 2-1/4 Hx Hd 4 Anti-Seize 197 ft-lbs Pillow Block
30 #8 Pin (7/16-20 x 2-1/2) 4 Anti-Seize N/A Pillow Block
31 #7 Pin (3/24-20 x 2-1/2) 4 Anti-Seize N/A Pillow Block
33*** M16 x 35 Hx Skt Hd 6 Anti-Seize N/A Rotodiff to Roto. Flange
34 5/16-18 x 3/4 Hx Skt Hd 6 Anti-Seize N/A Gearbox to Gbx. Flange
35** 3mm Set Screw 1 Anti-Seize N/A Port Block
36 3/8 x 1 Pin 2 Loctite 680 N/A Spline Hub
37** 30 x 1.5 mm x 1.4W Snap Ring 1 N/A N/A Rotodiff Port Block
39*** M16 x 40 Hx Skt Hd 6 Anti-Seize N/A Rotodiff to Roto. Flange
40 5/16-18 x 1/2 Set Screw 1 Anti-Seize N/A Flange to Key
* No. 2 - Quantity of 4 on serial numbers below CF000272
Quantity of 2 on serial numbers CF000272 thru CF000678
* No. 2 - Quantity of 0 on serial numbers above CF000979
Quantity of 2 on serial numbers CF000272 thru CF000678
* No. 21 - Quantity of 4 on serial numbers below CF000272
Quantity of 6 on serial numbers CF000272 thru CF000678
Quantity of 9 on serial numbers above CF000679
** Nos. 35 & 37 - Not used on serial numbers above CF000678
*** No. 33 - Used with Rotodiff 107/D6V
*** No. 39 - Used with Rotodiff 1071