Installation Manual

5990-3760 Copyright 2006 Hewlett-Packard Development Company, LP 9
1. INTRODUCTION TO THE PROCURVE SECURE ROUTER
This installation guide describes the ProCurve Secure Router, details basic functionality, gives installation
instructions, and lists hardware specifications. For more information on router configuration for a specific
application, refer to the supplemental documents provided on your ProCurve SROS Documentation CD.
The router can be managed and configured through the command line interface CLI (accessible via the
VT100 (
Console connection) or Telnet) or through the Graphical User Interface (GUI), using a Web
browser. These two methods are described in the Quick Start Guide provided with your router. For detailed
information on the CLI, refer to the SROS Command Line Interface Reference Guide, also on the CD. The
GUI is contains integrated help and various wizards to facilitate configuration. The
Console port is
enabled by default, with no configured password.
The ProCurve Secure Router is a mid-range IP router designed for medium- to large-office connectivity
over Frame Relay or point-to-point (PPP) networks. This modular platform offers a complete solution for
access routing and WAN connectivity in a single, compact package. The main base units support a variety
of interchangeable interface modules and backup modules. The ProCurve Secure Router base units include
the following:
ProCurve Secure Router 7102dl
• 1U-high housing, rack-mountable, metal enclosure
• Two module (card) slots
• Two built-in Ethernet ports
•
Console port
•
Encryption Module slot
•
Compact Flash slot
ProCurve Secure Router 7203dl
• 1U-high housing, rack-mountable, metal enclosure
• Three module (card) slots (two small, one wide)
• Two built-in Ethernet ports
•
Console port
•
Encryption Module slot
•
Compact Flash slot
• Redundant power supply (RPS) option
The interface modules in this series provide the following WAN connectivity options:
• T1/FT1
• T1/FT1 + DSX-1
•Dual T1
• E1/FE1
• E1/FE1 + G.703 Drop
• Dual E1/FE1
• Dual ISDN BRI (U and S/T)
• Serial (V.35/X.21)
• ADSL (Annex A and Annex B)
• Octal Serial Wide Module
• Octal T1/E1 Wide Module (no external CSU/DSU needed)