Installation Manual

Appendix B. Safety and Regulatory Information ProCurve Secure Router Installation Guide

Grounding

This product is a Safety Class I compliant product and has a protective earthing terminal. There must be an

uninterruptible safety earth ground from the main power source to the product's power cord or supplied

power cord set. Whenever it is likely that the protection has been impaired, disconnect the power cord until

the ground has been restored.

For LAN cable grounding:

• If your LAN covers an area served by more than one power distribution system, be sure their safety

grounds are securely interconnected.

• LAN cables may occasionally be subject to hazardous transient voltages (such as lightning or

disturbances in the electrical utilities power grid). Handle exposed metal components of the network

with caution.

Servicing

There are no user-serviceable parts inside this product. Any servicing, adjustment, maintenance, or repair

must be performed only by service trained personnel.

This product does not have a power switch; it is powered on when the power cord is plugged in to an AC

power source.

Accessories

Regulatory information for accessories can be found in the installation instructions included with them.

Regulatory Model Identification Number

For regulatory identification purposes, this product has been assigned a Regulatory Model Number

(RMN). The RMN for your product is RSVLC-0407. The RMN should not be confused with the marketing

name (ProCurve Secure Router) or the Product Number (J8752A or J8753A).