Installation Manual

ProCurve Secure Router Installation Guide Option Modules

2xISDN BRI U Interface Module

The 2xISDN BRI U Interface Module (see Figure 15) adds ISDN BRI (with U interface) capability to the

ProCurve Secure Router. Refer to Table A-11 on page 46 for the pinouts. Refer to Table A-12 on page 47

for the backup connector pinouts. An optional backup module is required for backup applications.

Figure 15. 2xISDN BRI U Interface Module

Features and Specifications

Operating Mode

• Independent TE mode of operation for each

interface

Features

• Line Rate: Network support for 128 kbps

(2 B channels per interface)

• Switch Compatibility: Euro-ISDN

• Test Capability: Local and network

loopbacks

Compliance

• EN 60950, IEC 60950

• EMC - see Electromagnetic Compatibility

(EMC) Table on page 62

Physical

• Dimensions: 6.99 cm (2.75 in) W x

10.80 cm (4.25 in) D

Environmental

• Operating temperature: 0°C to 50°C (32°F

to 122°F)

• Non-Operating Temperature: -20°C to

70°C (-4°F to 158°F)

• Relative Humidity: Up to 95 percent

noncondensing at 30°C (86°F)

• Non-Operating Relative Humidity: Up to

95 percent noncondensing at 30°C (86°F)

• Altitude: Up to 3.05 km (10,000 ft)