Manualshelf

Installation Manual

ManualsBrandsHP ManualsRoutersHP 7000 dl Router Series
11121314151617181920
ProCurve Secure Router Installation Guide Physical Description
5990-3760 Copyright 2006 Hewlett-Packard Development Company, LP 17
Reviewing the Rear Panel Design
Figure 3 shows the ProCurve Secure Router 7102dl rear panel. Figure 4 shows the ProCurve Secure Router
7203dl rear panel.
Figure 3. ProCurve Secure Router 7102dl Rear Panel Layout
Figure 4. ProCurve Secure Router 7203dl Rear Panel Layout
Rear Panel Interfaces
Encryption Module Slot
This slot supports the 7100/7200 IPSec Module (part number J8471A) and the 7100/7200 IPSec Base
Module (J9026A). These modules are designed to be used in the ProCurve Secure Router to activate
encryption/decryption and security services.
The 7100/7200 IPSec Module (J8471A) provides the following security services to the host processor:
DES, triple-DES(3DES), AES, SHA-1, MD5, and random number generation. Performance metrics
include 528 Mbps (DES), 176 Mbps (3DES), and 422 Mbps (AES). The power consumption of the card
does not exceed 2 watts. See Installing the Encryption Module on page 40 for installation instructions.
The 7100/7200 IPSec Base Module (J9026A) activate software encryption/decryption and security
services for IPSec VPNs. The card activates the following software security services in the host processor:
DES, triple-DES (3DES), AES, SHA-1, MD5, and random number generation.The power consumption of
the card does not exceed 1 watt. See Installing the Encryption Module on page 40 for installation
instructions.
Compact Flash Slot
This slot supports any Type 1 CompactFlash
®
card (16 MB to 1GB). See Installing a CompactFlash
®
Card on page 40.
Redundant Power Supply (RPS) Input
This input supports a backup power supply for the unit with the use of the ProCurve 600 Redundant and
External Power Supply (J8168A). See Supplying Redundant Power to the Unit on page 41.
Power Supply
The ProCurve Secure Router has a worldwide auto-ranging AC power supply with an IEC connector. The
appropriate three-prong cable is included in the shipment. Please refer to Supplying Power to the Unit on
page 41 for connection details.
ProCurve SR IPSec Module
J8471A