Installation Manual

ProCurve Secure Router Installation Guide Introduction to the ProCurve Secure Router
5990-3760 Copyright 2006 Hewlett-Packard Development Company, LP 11
Electrical
Environmental
Unpack and Inspect the System
Each ProCurve Secure Router unit is shipped in its own cardboard shipping carton. Open each carton
carefully, and avoid deep penetration into the carton with sharp objects.
After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged in
transit, immediately file a claim with the carrier and contact your local HP representative or reseller.
Contents of Shipments
ProCurve Secure Router 7000dl (7102dl and 7203dl)
Shipments of the ProCurve Secure Router 7000dl include the following items:
• ProCurve Secure Router 7000dl base unit
• Racking hardware
• ProCurve SROS Documentation CD
• Installation Guide
• Quick Start Guide
• Software License, Warranty, and Support documentation
• Console cable, power cord
ProCurve Secure Router dl 1xT1 Module
Shipments of the 1xT1 Module include the following items:
• 1xT1 Interface Module
• Quick Start Guide
• 15-foot RJ-45 to RJ-45 cable
ProCurve Secure Router 7102dl ProCurve Secure Router 7203dl
AC Voltage 100 to 127/200 to 240 volts 100 to 127/200 to 240 volts
Maximum Current 0.4 A/0.2 A 0.8 A/0.4 A
Frequency Range 50 to 60 Hz 50 to 60 Hz
ProCurve Secure Router 7102dl ProCurve Secure Router 7203dl
Operating
Temperature
0°C to 50°C (32°F to 122°F) 0°C to 50°C (32°F to 122°F)
Non-Operating
Temperature
-20°C to 70°C (-4°F to 158°F) -20°C to 70°C (-4°F to 158°F)
Relative Humidity
(noncondensing)
Up to 95 percent at 30°C (86°F) Up to 95 percent at 30°C (86°F)
Non-Operating
Relative Humidity
(noncondensing)
Up to 95 percent at 30°C (86°F) Up to 95 percent at 30°C (86°F)
Maximum Altitude 3.05 km (10,000 ft) 3.05 km (10,000 ft)